Meet the All-New 2026 Harley-Davidson® Deadwood

Harley-Davidson has introduced the new 2026 Harley-Davidson® Deadwood™, a stripped-down Cruiser inspired by post-World War II garage customizers, early bobber-style motorcycles and the rebellious spirit of the Sturgis Motorcycle Rally.

With its blacked-out finishes, solo seat, low-slung profile and Milwaukee-Eight® 117 Classic engine, the Deadwood delivers vintage Harley-Davidson attitude without giving up the performance, comfort and rider technology expected from a modern motorcycle.

Inspired by the Origins of Custom Motorcycle Culture

Following World War II, many returning riders removed unnecessary trim and components from their motorcycles to reduce weight, improve performance and create a more personalized machine. These garage-built motorcycles helped establish the early bobber style and laid the foundation for generations of Harley-Davidson customization.

The Deadwood draws directly from that era with a rugged, minimalist appearance designed to celebrate individualism, freedom and the spirit of the solo rider.

Stripped-Down, Blacked-Out Style

The 2026 Deadwood is finished almost entirely in deep black. The powertrain, exhaust, rear fender struts, handlebar, riser, controls, fork covers, turn signals and headlamp bucket all receive black finishes.

Denim Black paint covers the five-gallon fuel tank and front and rear fenders, while carefully placed chrome on the lower rocker covers and pushrod tubes highlights the classic V shape of the engine.

  • Denim Black paint
  • Blacked-out powertrain and exhaust
  • Black laced wheels
  • Tuck-and-roll solo seat
  • Chopped detachable windshield
  • Exposed rear fender and minimalist bodywork
  • Low 25.5-inch laden seat height

The Deadwood is not equipped with saddlebags, allowing the clean rear section of the Softail® chassis to remain visible. Lowered rear suspension and the chopped windshield complete its slightly slammed stance.

Milwaukee-Eight® 117 Classic Performance

At the heart of the Deadwood is the Milwaukee-Eight® 117 Classic V-Twin engine. It is tuned with a broad, flat torque curve intended to provide smooth, accessible power and satisfying performance in everyday riding conditions.

  • Displacement: 117 cubic inches, or 1,923cc
  • Peak torque: 120 lb-ft
  • Peak horsepower: 98 horsepower
  • Compression ratio: 10.3:1
  • Recommended fuel: 91 octane

A performance-oriented 2-into-1 exhaust promotes efficient exhaust flow while producing a deep rumble at idle and a stronger exhaust note under acceleration.

Riders looking for additional performance can also personalize the Deadwood with available Screamin’ Eagle® Stage Kits, intake components and exhaust upgrades from Harley-Davidson® Genuine Motor Parts & Accessories.

Vintage Looks with Modern Rider Technology

Although the Deadwood is inspired by motorcycles from an earlier era, it includes a full suite of modern Harley-Davidson technology designed to enhance rider confidence and control.

  • Straight Line and Cornering Antilock Braking System
  • Straight Line and Cornering Traction Control
  • Straight Line and Cornering Drag Torque Slip Control
  • Tire Pressure Monitoring System

Three Selectable Ride Modes

The rider can use the handlebar-mounted Mode button to change the motorcycle’s performance characteristics and level of electronic intervention.

  • Road Mode: Delivers balanced performance for everyday riding.
  • Sport Mode: Provides stronger low- and high-speed torque response with smooth power throughout the gears.
  • Rain Mode: Adjusts performance and electronic intervention to provide greater confidence when traction is limited.

LED Lighting and Rider Convenience

The Deadwood features full LED lighting designed to provide strong illumination while maintaining its vintage-inspired appearance.

  • Seven-inch LED headlamp with signature lighting ring
  • LED auxiliary fog lamps
  • Combination LED stop, tail and turn lighting
  • Five-inch console-mounted analog speedometer
  • Multi-function LCD information display
  • USB-C charging port
  • Two heated-gear connectors beneath the seat

Classic Softail® Lines with Modern Comfort

The Deadwood is built on the Harley-Davidson® Softail® chassis. Its rear suspension is hidden below the seat, preserving the clean appearance of a vintage hardtail frame while providing the comfort and control of a modern suspension system.

A rear monoshock with hydraulic preload adjustment allows the rider to adapt the suspension for changing loads and road conditions. The motorcycle also features 49mm dual-bending valve front forks, tubeless laced wheels and Dunlop® Harley-Davidson® Series tires.

  • Rear suspension travel: 3.4 inches
  • Front tire: 100/90B19
  • Rear tire: 150/80B16
  • Front brake: Single 300mm disc
  • Rear brake: Single 292mm disc

Inspired by Deadwood and the Sturgis Rally

The Deadwood name connects the motorcycle to both the history of the American West and the early years of the Sturgis Motorcycle Rally.

In 1947, more than 400 riders traveled to the Black Hills Motor Classic to ride the winding roads surrounding Sturgis, Spearfish, Lead and Deadwood. The motorcycle’s tank graphics and overall design draw from that Western heritage and the rebellious character associated with the region.

Coming Soon to Sound Harley-Davidson

The Deadwood is expected to begin arriving at authorized Harley-Davidson dealerships soon and will make its public debut on August 7th during Harley-Davidson’s activation at the Sturgis Motorcycle Rally.

Contact the team at Sound Harley-Davidson to learn more, check availability or let us know you are interested in being among the first riders in Washington to see the new Deadwood in person.

Required
Required
Required
Required
Required
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.